Rockland Premier Roofing · Rockland County
Standing seam metal roofs formed on site — 50+ year service life, concealed fasteners, engineered for coastal wind and snow.
Call (329) 216-0831Brands we install & service
Written pricing. No obligation.
A standing seam metal roof is the last roof most homes in Rockland County will ever need: 50–70 years of service, no granules to shed, wind ratings well past anything a shingle carries, and a finish that looks the same in year 30 as year one. It costs roughly twice what asphalt does up front and about half as much per year of service.
Rockland Premier Roofing installs standing seam and exposed-fastener metal systems — panels roll-formed to the exact length of each roof plane, concealed clips that let the metal expand and contract, high-temperature underlayment, and trim details that keep water out at every edge. This is not a shingle crew that occasionally does metal; standing seam is a trade of its own.
💲 What does metal roofing cost in Rockland County? See the full 2026 cost guide →Mechanically seamed or snap-lock panels with no exposed screws on the field of the roof. Nothing to back out, nothing to re-seal in year 12.
Panels are formed to the run of each roof plane — no horizontal laps, no seams mid-slope where leaks start.
Factory-baked finishes with 30–40 year fade and chalk warranties. Dozens of colors, from charcoal and bronze to standing-seam classic galvanized look.
Clip spacing and gauge specified to the uplift and snow loads of your site, with snow guards where the roof sheds onto walkways and entries.
Hudson Valley winters put real weight on roofs. Standing seam sheds snow and ice cleanly, and we install snow guards wherever the roof sheds onto walkways, entries, or lower roofs.
Standing seam suits the full range of Rockland housing — from Nyack and Piermont historic stock to new modern builds — in profiles and colors that fit each one.
Asphalt here lasts 18–25 years. One metal roof replaces two or three asphalt cycles, without the tear-off and disposal each time.
Roof measurement, plane-by-plane, with photos of the deck, ventilation, and every penetration
Material and profile selection — panel width, seam height, gauge, and color with real samples
Tear-off, deck repair, high-temperature ice-and-water underlayment across the full deck
Panel forming and installation, trim and flashing fabrication, snow guards, and final walkthrough
Standing seam steel or aluminum with a PVDF finish is rated for 50 years and routinely goes longer. The finish warranty typically runs 30–40 years; the panels outlast it.
Not over a solid deck with underlayment and attic insulation — the setup on every residential install. The tin-roof-on-a-barn sound comes from open-purlin construction, not homes.
Metal goes on the same deck asphalt does. We strip the old roof, repair any soft plywood, and install over a full underlayment. Overlays are possible in some cases but we recommend a tear-off so the deck is verified.
Metal recovers a high share of its cost at resale and lowers insurance premiums with some carriers because of its Class A fire and high wind ratings — worth a call to your agent.
Written pricing, no obligation, no pressure.
Fill out the form below and we'll get back to you within 24 hours.
